Knowledge base · label classes

Energy label classes: what do A++++ to G mean?

Each label class stands for a range of calculated energy use per m². Here's how to read your label.

In short

The essentials at a glance

A home's energy label class depends on its calculated primary fossil energy use per m² per year (NTA 8800). Label A is between 105 and 160 kWh/m², label C between 190 and 250 kWh/m² and label G above 380 kWh/m². The lower the number, the more efficient the home and the higher the label.

Key facts

Label A
105 – 160 kWh/m²
Label C
190 – 250 kWh/m²
Label G
> 380 kWh/m²
Method
NTA 8800 (since 2021)
01

Table: energy label classes for homes

Thresholds for homes under NTA 8800 (EP2 indicator). Commercial buildings have different thresholds per use.
Label classPrimary fossil energy use (kWh/m² per year)
A++++≤ 0
A+++0 – 50
A++50 – 75
A+75 – 105
A105 – 160
B160 – 190
C190 – 250
D250 – 290
E290 – 335
F335 – 380
G> 380
02

What exactly does the number measure?

The label calculates how much fossil energy the home needs for heating, hot water, cooling, ventilation and auxiliary energy, under standard use. Energy you generate yourself, such as from solar panels, is subtracted. That is why a very efficient home with many solar panels can end up at 0 or below: label A++++.

  • It is primary energy: the energy needed to produce gas and electricity, not just what passes your meter.
  • It is per m² of usable floor area, so large and small homes are comparable.
  • It assumes standard occupant behaviour, not your actual consumption.
03

What does the label class say about your energy bill?

The label is a comparison measure, not a prediction of your bill. Your actual use also depends on the number of occupants, the thermostat setting and how long you shower. For reference: according to Milieu Centraal an average household uses about 1,040 m³ of gas and 2,430 kWh of electricity a year.

Still, two similar households in a label A and a label E home differ substantially in use. Every 100 m³ less gas saves about €140 a year at today's price (around €1.39 per m³, CBS 2026). Also read save on energy costs.

04

How do you move up a label class?

Classes B, C and D are narrow (30 to 60 kWh/m²). A home just below a threshold sometimes moves up a class with one measure, such as cavity wall insulation or HR++ glazing. See the 7 most effective measures, or have tailored energy advice calculate which measure gets you over the line. Also read what a higher class gives you.

Accurate recording pays. With the basic method the adviser uses default values when evidence is missing; with invoices and product sheets you often end up a class higher.

Frequently Asked Questions

Answers to the questions we are asked most about this topic.

1. Which energy label is good?

Label A or higher is considered good; B and C are reasonable. Label C is also the legal minimum for offices. From label D down there is usually a lot to gain with insulation. Homes built from 2021 usually reach A+ or better.

2. What is the difference between energy label A and A++++?

Label A is between 105 and 160 kWh/m². A+ to A++++ are more efficient; A++++ means the home uses no fossil energy on balance (≤ 0 kWh/m²), usually thanks to heavy insulation, a heat pump and solar panels.

3. Why does my old label show an energy index?

Labels from before 2021 were calculated with an energy index (NEN 7120). Since 1 January 2021 NTA 8800 calculates in kWh per m². Old labels remain valid until their expiry date.

4. Do the same classes apply to offices?

No. Commercial buildings have their own thresholds per use. See energy label for commercial buildings.

Get In Touch

We are certified energy label specialists. Get in touch to book an inspection or ask us anything - we respond within one business day. You can also check an energy label, browse our services, or request a service online.